How To Apply Large Die Cut Stickers

Need help applying your new large die-cut sticker? Don’t worry we have step by step instructions on how to apply your sticker to fit perfectly! We also offer application tools at a low price to help remove any air bubbles while protecting the quality of your sicker.

If you need help applying any other types of stickers we also have guides for Small Stickers or Decals, Large Transfer Stickers, Large Windshield Stickers, Transfer Sticker Preparation and Family Stickers. We are also available through live chat, phone and email to answer any of your sticker and decal questions.

How To Apply Large Die Cut Stickers

Application Video

Items Needed

Sticker

Ruler

Masking Tape

Cleaning Solution

Paper Towels

Straight Edge

Application Steps

Step 1

Clean the area thoroughly with rubbing alcohol or soap and water. Do not use Windex or similar products because it will leave a residue behind that will prevent the sticker from adhering well.

Step 2

Measure and place the sticker in the desired location. Put a piece of masking tape down the center of the sticker to hold it in place.

Step 3

Lift half of the sticker up and peel off the white paper backing. Hold the sticker taunt but be careful not to pull the masking tape off. Cut the paper backing off.

Step 4

Slowly lower the sticker by rubbing it in place with a felt squeegee or a credit card wrapped in a sock. Start at the middle and then work your way out to the edges.

Step 5

Fold the remaining half back and remove the paper backing. Slowly lower the sticker by rubbing it with the felt squeegee or sock covered credit card. Start at the middle and work to outer edges.